Auto Cook - Klarstein LUMINANCE STEAM Manual De Instrucciones

Auto Cook

1. In standby mode, press
menu mode; press the key more than once, you can switch between the different
cooking types such as d01, P01, S01, at this point you can press the
choose defrost, non steam menu, steam menu switches between three types of
cooking.
When the display" A " lights, enter menu mode automatically, the default symbol
weight, cooking time and cooking weight light; the display shows P01 or S01.
2. Press the and flashing display shows P01 or S01, at this point, you can press"
or select the menu type (P01-P40 or S01-S40).
Notes
1. For non-steam menu (P01-P40), press
weight of menu selection state automatically, at this point, you can press
choose the automatic menu weight cooking time display.
2. For the steam menu, at this time, if you need to adjust the default cooking time, you
can press (9 , and makes the default cooking time of flashing, at this point, press
oder to adjust the Cook time menu.
3. Press button to start cooking.
• After steam auto menu, the water pump will withdraw the water back to water tank,
there will be some noise sound.
• After steam auto menu, you need to clean the water on cavity and door panel.
• If the menu need preheating, don't put the food in the oven during preheating.
Only when the temperature is reached, can you put in the food to start cooking.
temperature is reached, can you put in the food to start cooking.
button once, the display
to confirm menu selection and enter the
lights, go into defrost
or to
or
EN
55