Display; Start Mode - Nederman 14527837 Manual Del Usuario

keypad and menu for Fan Inverter are also described in the 'VACON 100 HVAC
Application Manual', see figure 1(B).
Table 4-1: Keypad description
Button Name Function
•
1 BACK/RESET Move backward in the menu.
•
Exit Edit mode.
•
Reset faults with a long press.
•
Go to Main menu.
•
2 UP Scroll up in the menu.
•
Increase a setting value.
•
3. FUNCT Enter Choose action page.
•
Change the control place.
•
Enter the control page.
4. RIGHT Move the cursor right.
5. START Used to start Fan Inverter locally.
5

Display

The default view for the display is the Multimonitor page displaying 9
parameters, see figure 6. Press the BACK/RESET button to access the Main
menu, see figure 5 and figure 7. If a menu item has been saved to Favourites
to make it more easily accessible, select Favourites and press OK to access
it. Press OK repeatedly to get back to Main menu. If no button is pushed, the
display returns to the Multimonitor page after one minute.
NOTE! See the 'Fan Inverter Installation and Service Manual' and the 'VACON
100 HVAC Application Manual' for information about parameters and menu
items before making any changes.
Pressing the FUNCT button accesses the Choose action page, see figure
8. Selecting Control page accesses the Keypad SP1 page, see figure 9. The
Multimonitor page and the Keypad SP1 pages are used for troubleshooting.
Press OK repeatedly to get back to the Main menu.
To control Fan Inverter locally using the keypad START and STOP keys, press the
FUNCT button to access the 'Choose action' page. Select 'Local/Remote' and
press OK. Select Local and press OK, see figure 10. The upper right window
now displays Keypad instead of I/O. Press OK repeatedly to get back to the
Main menu.
6

Start mode

When Fan Inverter is installed, it is set to be started either locally or remotely
and this setting should be marked below.
Locally (Keypad)
Remotely (I/O)
Remotely (Fan Timer and I/O combination)
___________________________________
Button Name Function
•
6. DOWN Scroll down in the menu.
•
Decrease a setting value.
•
7. OK Enter the active level/item.
•
Confirm the current selection.
8. STOP Used to stop Fan Inverter locally.
9. LEFT Move the cursor left.
Fan Inverter EN
11