Operation; Cleaning Operations; Transport; Storage - Würth TSS 7-L BASIC Traducción Del Manual De Instrucciones De Servicio Original

Note: The appliance is suited as industrial vacuum
cleaner to take up dry, non-combustible dusts with
AGW values greater than or equal to 1 mg/m
Installation of the filter bag
 Release and remove the suction head.
 Remove the main filter basket.
 Insert the fleece filter bag.
 Insert main filter basket.
 Insert and lock the suction head.

Operation

Turning on the Appliance
 Plug in the mains plug.
 Switch on the appliance at the main switch.

Cleaning operations

 Perform the cleaning operation.
Turn off the appliance
 Switch off the appliance at the main switch.
 Pull out the mains plug.
After each operation
 Empty the container.
 Vacuum and wipe the appliance inside and
outside with a damp cloth.

Transport

CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you trans-
port it.
 When transporting in vehicles, secure the ap-
pliance according to the guidelines from slip-
ping and tipping over.

Storage

CAUTION
Risk of injury and damage! Note the
weight of the appliance in case of stor-
age.
This appliance must only be stored in interior
rooms.
14

Care and maintenance

DANGER
.
3
First pull out the plug from the mains be-
fore carrying out any tasks on the ma-
chine.
ATTENTION
Keep the device and the ventilation lou-
vres clean in order to be able to work
well and safely.
If the vacuum cleaner should fail inspite of thor-
–
ough manufacturing and testing procedures,
have the repair performed by a Würth master-
Service centre.
Please indicate the part number taken from the
–
type plate of the vacuum cleaner in case of
questions or spare parts orders.
Dust extracting machines are safeguards for the
prevention or elimination of hazards defined in the
regulations of BGV A1.
In order to carry out maintenance work, the
–
user must disassemble, clean and service the
unit, in so far as this is possible without endan-
gering maintenance personnel and other per-
sons. Suitable precautions include decontami-
nation before the unit is disassembled. Precau-
tions must be taken for local filtered forced air
ventilation at the place where the unit is disas-
sembled, the cleaning of the maintenance sur-
face and suitable protection of the personnel.
The outside of the unit should be cleaned thor-
–
oughly and any harmful substances removed.
Alternatively, a sealed coating may be ap-
plied before the unit is removed from the dan-
ger area. All unit parts are to be considered
contaminated when they are removed from
the danger area. To avoid distribution of the
dust, you must take the appropriate measures.
In the framework of maintenance and repair
–
work all contaminated objects that cannot be
cleaned satisfactorily must be disposed of.
Such objects must be disposed of in imperme-
able bags in accordance with the valid provi-
sions for the disposal of such waste.
GB - 3