Make Electrical Connections - Bradley SN2013 Manual De Instrucciones

Installation
3

Make Electrical Connections

WARNING! The Accuzone Infrared activation must be connected with a 12V DC plug in adaptor. Connections
to 110 VAC can cause personal injury and will result in damage to the electronics.
STOP!!! If installing optional Shroud/Slip Ring or Towel Dispensers, complete those installations before
proceeding to Step 4 (see Optional Equipment Installation page).
Left Sensor
(Black)
IR Sensor
(269-1184-DC)
Snap each sensor circuit plug into the
A
associated solenoid circuit plug located on
the valve bracket .
Snap the wall adapter barrel plug into the
B
barrel plug located on the valve bracket
wire harness .
Bradley • 215-923 Rev. M; ECN 17-00-002
Right Sensor
(Red)
Center Sensor
(Green)
SN2013, SN2033 - Infrared
(TMA: S45-3489
Plug-In Adapter
(261-147A)
8/21/2017
Valve Set
TL: S45-3488)
7