Kohler K-16137-4 Manual Del Usuario página 5

Spray Tube
Assembly
3. Spray Assembly Installation
Connect the long braided hose to the spray tube assembly using
thread sealant.
Remove the washer from the spray assembly shank.
Insert the shank through the hole in the bidet from the front of
the bidet.
Slide the washer onto the shank from the inside of the bidet and
thread the shank into the spray tube assembly until snug.
Kohler Co.
Washer
Spray
Shank
Assembly
Apply Thread Sealant.
Long Braided
Hose
5 116373-2-AB