Emmaljunga Cup Holder XL Instrucciones De Uso página 11

3
Installation of the Cup holder on the Left side NXT90
3. 1 Place the bracket on the handlebar on the left side seen from standing behind
the handlebars and ensure that the bulge of the bracket engages in an indentation
3. 2 Close the bracket round the chassis and click both sides into place.
4
Installation of the Cup holder on the right side NXT90
4. 1 Place the bracket on the handlebar on the Right side seen from standing behind
the handlebars and ensure that the bulge of the bracket engages in an indentation
on the handlebars.
4. 2 Close the bracket round the chassis and click both sides into place.
5
Installation of the Cup holder on Viking, Double Viking, Super Viking,
Super Nitro, City Cross, Duo Combi, Scooter.
5. 1 Attach the bracket on the handlebar, as shown in the picture, either on the left or
right side
5. 2 Close the bracket round the chassis and fasten the bracket with the included
screws. When folding the chassi: Keep the clip on the chassis when folding. Only
remove the Cupholder before folding.
6
Attaching the Cup holder.
6. 1 Insert the cup holder in the bracket so that the two marks on the bracket and cup
Holder are parallel.
6. 2 Fixed and ready to go.
IMPORTANT INFORMATION- READ THESE INSTRUCTIONS CAREFULLY BEFORE USE
AND KEEP THEM FOR FUTURE REFERENCE. YOUR CHILD´S SAFETY MAY BE AFFECTED
IF YOU DO NOT FOLLOW THESE INSTRUCTIONS. Always read the instructions for use in
conjunction with the manual for the relevant Pram. This product complies with EN 1888:2012.
Sales or marketing of the product outside the EU, EFTA countries is not allowed. Please visit
www.emmaljunga.co.uk for the latest version of this manual before using the product.
Cup Holder XL v 1.2 11