1
2
stop
5
stop
6
7
stop
stop
8
9
stop
stop
11
®
8
* Nespresso
is a third party trademark and has no connection with HANDPRESSO SAS.
3
4
12/24 V
stop
stop
stop
OK
NO
10
2'30
stop
x3
12
stop
stop
13
1 - Before using your Handpresso Auto Capsule, park in a safe
spot for you and the other road-users, and keep the parking brake
engaged and the engine turned on.
2 - Uncoil the power cord before installing Handpresso Auto Capsule
vertically in the cup holder.
3 - Plug the power cord to a 12 or 24V cigarette lighter plug.
Follow the whole process on the display of your Handpresso Auto
Capsule.
4 - Unscrew the portafilter. Beware not to touch the drilling system in
the bottom of the capsule holder as it is sharp.
5 - Fill the water in the machine. Beware not to pour too much
water! Therefore, fill the cup with water up to the black line and pour
it in the machine by watching the water level indicator.
As long as there is not enough water, the water level indicator
flashes white. The light will be steady green when the adequate
stop
water level is reached. It flashes red rapidly if there is too much
water.
Stop adding water when the water level indicator is green.
The machine will start only if the water level is green.
If the water level indicator flashes red, empty the water of the
machine and start again.
6 - Place a capsule in the capsule holder.
14
7 - Close the portafilter up to the locking indicator. The locking
indicators (white lines) have to be aligned.
8 - Press the ON button to start the cycle of the Handpresso Auto
Capsule.
9 - The display will inform you of the cycle progression. Wait until
you hear 3 bleeps (approx. 2.30 minutes). Beware: When the motor
noise stops, it does not mean that the machine is ready!
10 - Flip the machine around, still plugged and place it over a cup.
11 - Push the espresso
starts again in order to keep the pressure necessary to make your
espresso.
The orange safety indicator appears. It informs you that the
machine is under pressure. Don't open the portafilter of your
machine as long as the orange safety indicator is visible!
12 - When the cup is filled to your liking, press the STOP button –
until the orange safety indicator disappears – in order to stop the
coffee.
13 - Turn over the machine and place it back vertically in its
housing.
Re-open the portafilter to remove and dispose of the used capsule.
Pour out any excess water from the water reservoir.
14 - Enjoy your espresso.
To prepare the second espressso, press the ON button to make your
machine leave the sleep mode, and go back to step 4.
Instructions
button. The motor of your machine
9 9