Twilight Bristle Blaster Pneumatic Instrucciones De Servicio página 22

Bristle Blaster Pneumatic
®
Correct direction of
operation
If the tool does not work correctly, check the following:
Æ Are you using a suitable Bristle Blaster
Blaster Belt.
®
Æ Are you operating the tool with the correct speed? – Problems with the tool, see section 10, Troubleshooting.
Æ Are you using a Bristle Blaster
runs in the correct direction (see section 7, Placing in operation, Fig. 2).
Æ Is the Accelerator Bar showing signs of wear? Check the Accelerator Bar. In case of wear turn by approx. 45°
or exchange.
Less pressure = longer service life and
higher performance
Holding machine
Belt for the surface to be machined? – Use the most suitable Bristle
®
Belt with the wrong direction of travel? – Fit the Bristle Blaster
®
Operating instructions
Observe the correct working position!
Angle machining
GB/US
Belt such that is
®
21