Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
This instruction describes the terminals E900 and E910. Hereafter the products is referred
to as the terminal.
The terminal is a graphical operator panel in a family of terminals developed to satisfy the
demands made for human-machine communication. The built-in functions in the terminal
include the possibility to display and control text and graphics, dynamic indication, alarm,
recipe handling and time channels.
The terminals have, for the most part, an object- oriented way of working, which makes
them easy to use. The terminal can be programmed directly from the terminal or from a
personal computer with the software package E-Designer for Windows. Hereafter the prod-
uct E-Designer is referred to as the PC software. The whole programmed project is trans-
ferred to the terminal and stored in the terminal.
Change operation mode according to the following table.
Terminal
E900
[←] + [MAIN]
E910
The switch on the back of the
terminal in position number 4.
For more detailed information please see the Manual for the terminal.
7-4
GB
Key combination
Publicidad
