Thorough Cleaning - iSi Soda Siphon Manual Del Usuario

Cleaning
NOTE: If the siphon is used with pure water on a regular basis, it is not
necessary to clean it very often. Do not use any sharp objects during
cleaning.

ThOROuGh CLEANING

NOTE: Review the sequence on the back right-hand page.
1.
Press the lever until the device is completely empty and has been
depressurized. Remove the siphon head from the device.
2.
Remove the riser tube and measuring tube as shown.
3.
Rinse the product components with clean drinking water only.
NOTE: Do not clean the siphon in the dishwasher and do not clean it with
boiling water.
NOTE: Never use scouring agents or abrasive sponges/brushes.
Troubleshooting
WARNING Never use force to open a pressurized iSi Soda Siphon.
RELEASE PRESSuRE: Press the lever until there is no longer any
pressure in the iSi Soda Siphon. Only then should you unscrew the siphon
head from the bottle.
► S oda charger has not been pierced
The charger used is incompatible
▪
Only use original iSi soda chargers.
The charger was inserted incorrectly
▪ Insert the charger correctly (review sequence on the right-hand
page, follow step 5).
The piercing unit has been damaged
▪ Send the device to the iSi service center.
English
15