JNF IN.27.100 Manual De Instalación página 18

EN
JNF ELECTRONIC LOCK SETTING
Authorization card
The authorization card is set at the factory following the lock itself.
We can provide by request the same authorization card for a group of locks.
Create user card (Max 100, Max 5 groups).
Create group 1: Approach 1 time the authorization card, the LED blinks blue, approach the cards one by one as many
you want to add. (Within 6 seconds without the card, the LED stops blinking).
1x
pass the authorization card
To add a new card group just follow the same instructions, the cards previously entered do not change.
Create group 2: Approach 2 times the authorization card, the LED blinks blue, approach the cards one by one as many
you want to add. (Within 6 seconds without the card, the LED stops blinking).
2x
pass the authorization card
To add a new card group just follow the same instructions, the cards previously entered do not change.
Create group 3: Approach 3 times the authorization card, the LED blinks blue, approach the cards one by one as many
you want to add. (Within 6 seconds without the card, the LED stops blinking).
Create group 4: Approach 4 times the authorization card, the LED blinks blue, approach the cards one by one as many
you want to add. (Within 6 seconds without the card, the LED stops blinking).
Create group 5: Approach 5 times the authorization card, the LED blinks blue, approach the cards one by one as many
you want to add. (Within 6 seconds without the card, the LED stops blinking).
Manual de instalação / Installation Manual / Manual de instalación - MI070-4
1x
pass all the user cards of
the group 1
1x
pass all the user cards of
the group 2
1x
pass the authorization card
to finalize the code or wait
6 seconds
2x
pass the authorization card
to finalize the code or wait
6 seconds
www.jnf.pt
8/32