Tension Adjustment Of The Door Spring; Connection Of Drain Hoses - Blaupunkt 5VT710NA Manual De Montaje Y Modo De Empleo

Tension adjustment of the door spring

The door springs are set at the factory to the proper tension for the outer door.
If aesthetic wooden panel are installed, you will have to adjust the door spring tension.
Rotate the adjusting screw to drive the adjustor to strain or relax the steel cable (see figure
5).
Door spring tension is correct when
the door remains horizontal in the fully
opened position yet rises to a close with
the slight lift of a finger.
Tension adjustment of the
door spring

Connection of drain hoses

Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure to avoid bend-
ing or crimping it. The top of the hose must be less than 1000mm.
Front
NOTE
The top of the
hose must be less
than 1000mm.
Figure5
PLEASE FIX THE DRAIN HOSE EITHER WAY OF A, B
A
Drain pipe
51
B
40mm
Counter