Error Codes - Blaupunkt 5VT710NA Manual De Montaje Y Modo De Empleo

Problem
The dishes are
not clean
Unsatis
-factory
washing
result
Cloudiness on
glassware
Black or gray
marks on dishes
Detergent left in
dispenser cups
The dishes are
not drying
Unsatis
-factory
drying
result

Error Codes

When some malfunctions come on, the appliance will display error codes to warn you:
Codes
E1
E4
WARNING!
Possible Causes What To Do
The dishes were not
loaded correctly.
The programme was not
powerful enough.
Not enough detergent
was dispensed.
Items are blocking
the path of spray arms.
The fi lter combination in the
base of wash cabinet is not
clean or is not correctly fi tted.
This may cause the spray
arm jets to get blocked. Com-
bination of soft water and too
much detergent.
Aluminum utensils have
rubbed against dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are removed too
soon
Wrong program has
been selected
Use of cutlery with a
low-quality coating
Meanings
Longer inlet time.
Overfl ow.
If overfl ow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfi ll or small leak, the
water should be removed before restarting the dishwasher.
56
See notes in „Loading the Dishwasher Baskets"
Select a more intensive programme.
See" Wash Cycle Table „.
Use more detergent, or change your detergent.
Rearrange the items so that the spray can rotate
freely.
Clean and/or fi t the fi lter combination correctly. Clean
the spray arm jets. See „Cleaning the Spray Arms".
Use less detergent if you have soft water and select a
shortest cycle to wash the glassware and to get them
clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refi ll the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once
t he dishes are barely warm to the touch. Empty the
low basket fi rst. This prevents water form dropping off
dishes in the upper basket.
In short program the washing temperature is lower.
This also lowers cleaning performance. Choose a
program with a long washing time.
Water drainage is more diffi cult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
Possible Causes
Faucets is not opened, or water intake is restric-
ted, or water pressure is too low.
Some element of dishwasher leaks.