Source - Philips 42PF9830A/37 Manual De Instrucciones

2496.1 16x24 en 14-12-2005

Source

This menu allows you to identify the accessory devices you have connected to the external
inputs/outputs.
Settings
Setup
Preferences
Source
Clock
Info
When you select
you to identify which type of accessory device is attached to this input.The TV detects the presence
of the connected device and the signal is routed appropriately.
Once you have selected the source type, e.g. DVD, this source will automatically be selected when
your remote control is in DVD mode, see p. 8, and when you press the
control.
Digital Audio
Select
Digital Audio In
Digital audio input.
Make your selection of the source to which the device with digital audio input has been connected.
In addition to accepting audio input via Digital Audio In, the TV can output Digital audio via the
DIGITAL AUDIO OUT
If your amplifier or receiver has a matching connector for Digital Audio In, you can connect it with a
single cable to the TV's
See Connect Accessory Devices, Digital Surround Receiver, p. 59.
10:11 Pagina 23
Source
AV1
AV2
AV3
HDMI
.......
, , , ,
AV1 AV2 AV3 HDMI1 HDMI2
when the TV expects digital audio for a connected device to come from a
connector to an external amplifier or receiver.
DIGITAL AUDIO OUT
& Select in the Setup menu.
Source
é
Press the cursor right.
"
Select the input to which the accessory device
is connected.
' Press the cursor right again to enter the list of
types of devices connected to the selected
input.
( Select the accessory device with the cursor
up/down.
, Side or Digital Audio In
AV+
.
, a list appears allowing
button on the remote
23