WARNING:
Always wear proper
personal hearing protection that
conforms to ANSI S12.6 (S3.19) during
use. Under some conditions and duration
of use, noise from this product may
contribute to hearing loss.
WARNING:
Always use safety
goggles. Everyday eyeglasses are NOT
safety goggles. Also use face or dust mask
if area of operation is dusty. ALWAYS
WEAR CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/ CSA
Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/ OSHA/ MSHA respiratory
protection.
To reduce the exposure to these chemicals,
wear approved safety equipment such as
dust masks that are specially designed to
filter out microscopic particles.
WARNING:
SERVICING OF DOUBLE-
INSULATED WET/DRY VAC
In a double-insulated Wet/Dry Vac, two
systems of insulation are provided instead
of grounding. No grounding means is
provided on a double-insulated appliance,
nor should a means for grounding be added.
Servicing a double-insulated Wet/Dry Vac
requires extreme care and knowledge of the
system and should be done only by quali ed
service personnel. Replacement parts for a
double-insulated Wet/Dry Vac must be
identical to the parts they replace. Your
double- insulated Wet/Dry Vac is marked
with the words "DOUBLE INSULATED" and
the symbol
(square within a square) may
also be marked on the appliance.
To reduce the risk of injury from electrical
shock, unplug power cord before servicing
the electrical parts of the Wet/Dry Vac.
IMPORTANT:
If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly quali ed person in order
to avoid a hazard.
IMPORTANT:
Remove the plug from the socket before
performing maintenance. Before using the
machine make sure that the frequency and
voltage shown on the rating plate correspond
with the mains voltage. Speci cations and
details are subject to change without prior
notice. The accessories shown in the pictures
may vary from model to model.
IMPORTANT SAFEGUARDS
The symbol on the product or packaging indicates
that the product must not be treated as domestic
refuse. Instead, it should be handed in to a
collection point for the recycling of electrical and
electronic components. By ensuring the product
is treated in the correct manner, you will help
prevent any negative impact on the environment
and health that might arise were the product to
be discarded as ordinary refuse. For further
information about recycling, you should contact
your local authorities, refuse collection service or
the sales outlet where you bought the goods.
WARNING:
• TO REDUCE THE RISK OF INJURY, USERS MUST
READ INSTRUCTION MANUAL. DO NOT RUN
UNATTENDED. DO NOT PICK UP FLAMMABLE,
COMBUSTIBLE OR HOT MATERIALS. DO NOT
USE AROUND EXPLOSIVE DUST, LIQUIDS OR
VAPORS. ELECTRICAL DEVICES PRODUCE
ARCS OR SPARKS WHICH CAN CAUSE FIRE
OR EXPLOSION. DO NOT USE AT FILLING
STATIONS OR ANYWHERE GASOLINE IS
STORED OR DISPENSED. DO NOT VACUUM
TOXIC OR CARCINOGENIC MATERIALS OR
OTHER HEALTH ENDANGERING MATERIALS
SUCH AS ASBESTOS OR PESTICIDES.
ALWAYS USE PROPER EYE AND RESPIRATORY
PROTECTION. TO REDUCE THE RISK OF
ELECTRICAL SHOCK, DO NOT EXPOSE TO
RAIN. STORE INDOORS. WHEN SERVICING,
USE ONLY IDENTICAL REPLACEMENT PARTS.
DO NOT TO BE USED AS A STEP STOOL.
PRODUCT SPECIFICATIONS
DXV06P
Model
Tank Capacity
6 Gallon
Power
120 V / 60 Hz / 8 A
Motor
Single Stage
Hose
1-7/8 in. x 7 ft.
Power cord
SJTW18AWG / 10 ft. Length
3
ENGLISH