Jøtul FS 91 Instrucciones Para Instalación página 47

Fig. 11
7. Adjust the burn chamber horizontally so that it is flush with
the front of the base.
8. Level and adjust the burn chamber vertically with the nuts
(Fig. 11 A). NB: It is extremely important for the burn chamber
to be vertically level!
Mount the 2 long threaded bars (Fig. 11 B).
9.
Fig. 12
10. Mount the rear part of the surround. Make sure it is aligned
with the base. Use the acrylic glue provided for gluing the
rear part.
B
A
Fig. 13
11. Mount the brackets on the upper side of the rear part of the
surround and the insert. Fasten the long threaded bars with
the wing nuts.
Fig. 14
12. Mount the upper part of the surround. Make sure it is aligned
with the rear part. Glue the upper part to the rear part with
the acrylic glue provided. Mount the bracket (A) to fasten the
rear and upper part of the surround together.
ENGLISH
A
47