Transport (Fig. 3); Receipt And First Cleaning; Installation And Environment Conditions (Fig. 3); Joining The Cabinets (Fig. 9) - Arneg Belgrado VDL 70 Manual Del Usuario

Belgrado
English
6) Power frequency
7) Input current
8) Electric power absorbed during the refrigeration phase (Fans + hot cables + lighting)
9) Electric power absorbed during the defrosting phase (Hot cables + fans + evaporators + lighting)
10) Lighting power (where foreseen)
11) Net display surface
12) Net load volume
13) Type of refrigerant fluid with which the plant operates
14) Environment climatic categories and reference temperature
15) Protection class against humidity
16) Job order number with which the cabinet has been manufactured
17) Order number with which the cabinet has been produced
18) Cabinet year of production
In case of technical assistance, in order to identify the cabinet communicate the following:
- the product name (2); the serial number (4); the job order number (16)

5. Transport (Fig. 3)

The cabinets are supplied on a wooden support fixed to the base for movement with forklift trucks.
Always position the forks at the point specified on the wooden support to avoid the risk of
overturning. Use a manual or electrical forklift truck that is suitable to moving the cabinet in question.
It must have a nominal capacity of at least 1,000 kg.

6. Receipt and first cleaning

On receiving the cabinet:
- make sure that the packaging is integral and no evident damage is present;
- remove the packaging with care so as not to damage the cabinet;
- check all parts of the cabinet ensuring that its components are integral;
- if damaged, immediately call the supplier;
- use neutral products for a first cleaning of the cabinet. Dry with a soft cloth, do not use abrasive
substances or metallic sponges
- do not use alcohol or similar products for the methacrylate parts (plexiglass).
For a correct disposal of the packaging take into consideration that it consists of:
Wood - Polyester - Polythene - PVC - Cardboard.
In compliance with the EEC 94/62 directive the suitability of the materials stated above is declared.

7. Installation and environment conditions (Fig. 3)

Do not position the cabinet:
- in environments with the presence of explosive gas substances;
- in open areas and therefore exposed to atmospheric agents;
- near to heat sources (direct solar light, heating plants, incandescent lamps etc.)
- near to air currents (doors, windows, air conditioning plants etc) that exceed the speed of 0.2 m/sec.
- remove the wooden supports on the base (used for transport) and mount the adjustable feet (Rif. 2)
positioning them so that the cabinet is horizontally positioned and with the aid of a leveller (Rif. 1)
check its position. If the cabinet is moved repeat the levelling control.
- before connecting the cabinet to the power line make sure that the data on the plate corresponds to
the characteristics of the electric plant to which it must be connected.
- for a correct functioning of the cabinet, the temperature and the environment relative humidity must
respect the parameters envisioned by the EN-ISO 23953-1/2 standard that foresee Climatic Category
3 (+25°C; H.R. 60%).
- check that the ventilation openings of the condensing unit are not blocked - version with built in unit.
N.B.All of these operations must be carried out by specialised technical staff.

8. Joining the cabinets (Fig. 9)

CHANNEL JOINING KIT
Pos. Name
1 Alignment plug Ø 4x80
2 Screw TC 4x35
3 Washer 5x10
4 Bush M4
20
Code
02940652
04715021
04480107
04520006
05060091 02 14/05/2010