Vasner Konvi Serie Manual Del Usuario página 22

VASNER
Commissioning
1. Plug the heater into a standard socket with 230 V ~ 50 Hz A.C. voltage.
2. The mechanical thermostat on the side can be used to switch the heating
on and off, and to continuously adjust the room temperature.
3. Due to their technological design, infrared heaters require about 10–15
minutes to warm up fully and for the heat to be felt in the room.
Note:
Depending on the previous temperature of the room, a general heating phase
is required to achieve the set temperature, as the radiated heat first needs to
penetrate the colder layers of air before it can warm up the objects in the room.
Cold rooms will take longer to warm up than rooms that started at room tempe-
rature.
22
GB