Vasner Konvi Serie Manual Del Usuario página 23

VASNER
Operation via an integrated thermostat:
The integrated thermostat is a mechanical thermostat that can be continuously
adjusted to the desired target temperature. A quiet click will sound when tur-
ning the wheel to indicate the current room temperature. Turning the thermos-
tat past this point will increase the target room temperature. The integrated LED
signals that the heater is actively heating. Once the set temperature has been
achieved, the LED switches off. This indicates the end of the heating phase. The
mechanical thermostat automatically maintains the room temperature you
have set using the wheel. To switch off the heater, simply turn the wheel to the
lowest temperature.
LED status display
Cold temperature
Hot temperature
Operation via a digital thermostat (optional):
Often, customers would like to operate one or multiple heaters via digital ther-
mostat systems or smart home systems, in order to configure different tempe-
ratures for different times of the day, setback temperatures, day/night phases or
absence times, for example. The Konvi hybrid heater can generally be operating
using digital thermostats or smart home systems. The selected thermostat sys-
tems determines the type of connection (fixed connection or plug connection).
Regardless of the external digital thermostat used, the integrated mechanical
thermostat must always be set to the highest temperature, as the digital ther-
mostat takes over the temperature control.
23
GB