MAGICMOUNT'" CHARGE TRANSMITTER
PLACEMENT IN VEHICLES
It is possible for the transmitter
to interfere with some
wireless systems within a
car. Specifically, key fobs
with immobilizers, keyless
start systems or tire pressure
monitors. Therefore, it is
recommended to test the
location of your transmitter
before deciding on final
placement.
Most interference issues will be
minimized by considering the
following placement guidelines:
• Install transmitter a minimum of
10 inches away from the ignition
lock, key fob docking station, or any
location where the key fob might be
stored while driving.
If the transmitter cannot be located a sufficient distance
away as described above, please use the following
suggestions whenever possible:
• Insert the key fob into the docking slot whenever possible
while operating the transmitter.
• Connect the transmitter to a 12 volt accessory port that is
powered only while the vehicle's ignition is in the "ACC" or
"ON" position.
• Place phone on transmitter after vehicle is started.
@
(<
(
��
7
0