Intermatic GRASSLIN thermio essential smart Instrucciones De Manejo página 57

5. Press the reset button (Fig. 1/13) to reset the display.
Setting the hysteresis
6. To set the hysteresis, press and hold both the top button (Fig. 1/6) and the bottom button (Fig. 1/9)
for five seconds.
The display for the switching differential symbol (Fig. 1/4) lights up on the display.
ð
7. Press the top button (Fig. 1/6) to increase the hysteresis or the bottom button (Fig. 1/9) to decrease
the hysteresis.
8. Once you have set the hysteresis, wait five seconds until the switching differential symbol stops
flashing.
ð The room thermostat only regulates once the temperature falls below the temperature set-
point by the amount of the hysteresis that was just set.
EN
57