Lutron GRAFIK Eye QS Instrucciones De Instalación página 5

QSE-IO Operating Modes and DIP Switch Settings
• For scene selection and special function modes, one GRAFIK Eye
control unit or a group of control units may be assigned to be operated by
the QSE-IO.
Dip Switch
Configuration 4 5 6 7 8
Scene selection
Special
(maintained)
Special
(momentary)
Shade input preset
('stop if moving')
Shade input preset
(no 'stop if moving')
Shade input
raise, lower, stop
Shade output
Partitioning
(momentary)
Partitioning
(maintained)
Occupant sensor
(automatic
on and off)
Occupant sensor
(manual on,
automatic off)
Zone Toggle
(maintained)
Zone Toggle
(momentary)
Zone Toggle
with Raise/Lower
(maintained)
Zone Toggle
with Raise/Lower
(momentary)
Note: "Stop if moving" means that if the
shades are moving and the input closes,
the shades will stop moving.
Switch up (On)
Switch down (Off)
®
QS
®
Contact Closures Invoke:
Input 1 Input 2 Input 3
Scene 1 Scene 2 Scene 3
Scene 5 Scene 6 Scene 7
Scene 9 Scene 10 Scene 11
Scene 13 Scene 14 Scene 15
Scene 1 Scene 2 Scene 3
Scene 5 Scene 6 Scene 7
Scene 9 Scene 10 Scene 11
Scene 13 Scene 14 Scene 15
Sequence Zone Scene
5-16 lockout lockout
Sequence Zone Scene
5-16 lockout lockout
Shade Shade Shade
Open Preset 1 Preset 2
1
Shade Shade Shade
Open Raise Lower
Open 1 Stop 1 Close 1
Wall 1 Wall 2 Wall 3
Wall 1 Wall 2 Wall 3
Closure causes scene 1
Open causes scene off
Closure causes nothing
Open causes scene off
Toggle 1 Toggle 2 Toggle 3
2 2
Toggle 1 Toggle 2 Toggle 3
2 2
Toggle 1 Toggle 2 Toggle 3
2 2
Toggle 1 Toggle 2 Toggle 3
2 2
75%, 50%, and 25% by default; however, presets are adjustable.
1
See "Preset Adjust Mode."
Toggles user-assigned GRAFIK Eye QS zone(s) between Off and a
2
preset value programmed by the user.
Raise and Lower commands affect the last GRAFIK Eye zone(s)
3
that were toggled by the QSE-IO.
• With partitioning, zone toggle, and occupant sensor modes, a different
GRAFIK Eye QS control unit or group of control units may be assigned for
each I/O closure.
Input 4 Input 5
Inputs
Scene 4 Scene off
Scene 8 Scene off
Maintained
Scene 12 Scene off
or momentary
Scene 16 Scene off
Scene 4 Scene off
Scene 8 Scene off
Maintained
Scene 12 Scene off
or momentary
Scene 16 Scene off
Panic Timeclock
Maintained only
mode en/disable
Panic Timeclock
Momentary only
mode en/disable
Shade Shade
Maintained
Preset 3 Close
1 1
or momentary
Shade Shade
Maintained
Stop Close
Maintained
Open 2 Close 2
or momentary
Momentary only Maintained
Wall 4 Wall 5
Maintained only Maintained
Wall 4 Wall 5
Maintained only Maintained
Maintained only Maintained
Toggle 4 Toggle 5 Maintained
2 2 2
Momentary
Toggle 4 Toggle 5
2 2 2
Maintained
Raise Lower
2 2 3
Raise Lower
2 2 3
Momentary
QSE-IO Control Interface Installation and Operation Instructions 5
Outputs
Maintained
Momentary
Maintained
Maintained
Maintained
Maintained
(grouped 1-3; 4-5)
Maintained