Hasselblad VH1CH Manual De Instrucciones página 5

* The Charging Hub, USB adapter and the USB Cable (Type C) are available as a kit, or as separate
items from the Hasselblad online store. The USB adapter varies in different regions and the
illustration for this USB adapter may differ from the actual adapter supplied.
INTRODUCTION
The Hasselblad Battery Charging Hub is designed for use with Hasselblad X system
batteries. It can accommodate and charge up to two X system batteries at the same
time. You may check and monitor the batteries power level during charging with the
help of the LEDs on this Battery Charging Hub. In addition, the built-in buzzer can
be turned on to activate beeping when charging is complete.
OVERVIEW
1
2
1. LEDs for Battery Power Level
Press the Function Button (2) once to check the battery power level when the battery is
inserted. When the Charging Hub is connected to a power source, the LEDs will
display the battery power level during charge automatically. The LEDs in the same
column refer to the battery inserted in the battery port aligned.
2. Function Button
Press once to check the battery power level. Press and hold for around 5 seconds to
turn the buzzer on/off (After a long press, a double beep means the buzzer has been
successfully turned on while a short beep means it has been turned off). The buzzer is
turned off by default.
3. Battery Ports
Connect the batteries for charging.
4. USB (Type C) Port
Connect to a USB adapter via a USB Cable (Type C). The Charging Hub can also be
connected to a computer for firmware updates using this port.
3
4
3