Hasselblad VH1CH Manual De Instrucciones página 6

USAGE
1. Connect to a Power Outlet
Connect the Type C port on the Charging Hub to a USB adapter using a USB Cable
(Type C). Connect the USB adapter to a power outlet (100 to 240 V, 50/60 Hz).
It is recommended to use the Charging Hub and the USB adapter as a kit. If not,
please choose an FCC/CE certified USB adapter that supports Quick Charge or
USB-PD protocol.
2. Insert the Batteries
Ensure the Charging Hub is placed on a flat and stable surface, then insert the
batteries vertically with their metal terminals aligned with the terminals in the battery
ports. The batteries will be charged simultaneously. During charging, the LEDs will
blink. As the battery charges, the number of blinking LEDs increase. Once a battery
is fully charged, the LEDs turn solid. If the buzzer is turned on, it sounds when all the
batteries are fully charged. To stop the buzzing, press the function button, remove
the battery, or disconnect the USB cable.
4
• Ensure each battery is firmly in
place and connected to its battery
port during charging.
• DO NOT cover the Charging Hub
when in use.