Probasics Three-in-One Commode Manual De Instrucciones página 4

TO USE COMMODE OVER TOILET
(AS A RAISED TOILET SEAT OR TOILET SAFETY FRAME)
1. Set commode to desired height (see "Adjust Commode
Height" section).
2. Position splash guard in place onto pail supports.
3. Remove back support by simply unscrewing the wing nut
assembly on either side.
4. Lift toilet bowl seat and place commode over toilet with
splash shield positioned over the center of the toilet bowl.
5. Lower the commode seat onto the frame before use.
6. Clean seat and splash shield with disinfectant after
each use.
TO USE AS A BEDSIDE COMMODE
1. Set commode to desired height (see "Adjust Commode
Height" section).
2. Push commode pail onto pail supports. Ensure that pail is
properly positioned below commode opening. Commode
is now ready for use.
3. When user is finished using commode, place commode pail
lid over commode pail to contain odors.
4. Remove pail and lid simultaneously to empty pail. Clean
seat and pail with disinfectant after each use.
CAUTION:
It is
support when using as a bedside commode. Serious injury
may result.
1. Use a mild soap and water solution, rinse thoroughly
with clean water, then dry with a soft cloth. Ensure that
commode is well rinsed and dried before using.
2. Never use organic solvents, abrasive cleaners or scouring
pads on any part of commode.
3. Check fit and tightness of all nuts, bolts and knobs
WEEKLY
to use.
4
NOT
recommended to remove the backrest
MAINTENANCE
to ensure that the commode is stable and safe