Working In Safety; Technical Data - Imer Group MASONRY 750 PLUS Manual De Uso

TRANSLATION OF ORIGINAL INSTRUCTIONS
Dear Customer,
Congratulations on your choice of purchase: IMER sawing
machines are the result of years of experience and are
equipped with all the latest technical innovations.

- WORKING IN SAFETY

To work in complete
instructions carefully.
This OPERATION AND MAINTENANCE manual must be kept
by the SITE MANAGER and be always available for
consultation.
The manual should be considered as a part of the machine
and must be kept for future reference, for the whole life of the
machine. Should the manual be lost or damaged, a
replacement copy can be ordered from the manufacturer.
The manual contains important information regarding site
preparation, installation,
procedures, and requests for spare parts. Nevertheless, the
installer and the operator must both have adequate experience
and knowledge of the machine prior to use.
In order to ensure operator safety, safe operation and long
service life, it is imperative to adhere to the instructions set out
herein and the requirements of the legislation in force
governing safety in the workplace. Use individual safety
equipment (suitable shoes and clothing, gloves, safety
glasses, etc.).
- It is mandatory to wear protective goggles.
- It is mandatory to use individual hearing protectors.
- Make sure that all signs are legible.
- It is strictly forbidden to carry out any form of
modification to the machine structure and systems.
IMER INTERNATIONAL accepts no responsibility in the event
of failure to comply with laws governing the use of this type of
equipment, with particular reference to: improper use, power
supply errors, lack of maintenance, unauthorised modification,
and failure to comply, either wholly or partially, with the
instructions set out in this manual.
IMER INTERNATIONAL reserves the right to modify features
of the saw and/or the contents of this manual, without the
obligation to update previous machines and/or manuals.
1

TECHNICAL DATA

Technical data are stated in Tab 2 and the electrical
specifications in Tab 3.
- TECHNICAL DATA
Model
Max disc diameter
Disc hole
Disc revs (230V/50Hz)
Disc revs (400V/50Hz)
Disc revs (400V/60Hz)
Disc revs (220V/60Hz) SPH
IMER INTERNATIONAL S.p.A
safety, read the following
machine use, maintenance
Masonry 750 Plus
750 mm
25.4 mm
976 rpm
1440 rpm
1475 rpm
1180 rpm
Disc revs (220V/60Hz) TPH
Disc rotation direction
(view from the movable disc
guard)
Cutting table dimensions
Overall dimensions
(width x length x height)
Overall dimensions for
transport
(width x length x height)
Weight of saw in operation
Weight for transport
Motor
Electrical
(230V/
features
50Hz)
Power (kW) 2.2
Rated voltage 220-
(V) 240
Frequency
50
(Hz)
Absorbed
13.8
current (A)
Rpm 1420
Type of
S1
service
Insulation
F
class
Protection
IP55
class
Capacitor
2 x 50
(µF)
2 . NOISE LEVEL AND VIBRATIONS
Tab 4 gives the sound pressure level of the machine
measured at the ear of the operator when running empty
(LPA) and vibrations transmitted when it is operating.
Type of
Model
motor
Masonry 750 Plus Electric
3 CUTTING SPECIFICATIONS
The sawing machine is designed to cut only bricks, ceramics,
marble, granite, concrete products and similar items. The
machine must be used ONLY with segmented or continuous
rim diamond cutting blades, which must be water-cooled at all
times. The use of blades for dry cutting is strictly forbidden and
the machine must not be used to cut any material other than
15
1475 rpm
clockwise
490x660 mm
850x1550x1600 mm
850x1550x1600 mm
285 kg
202 kg
Table 2
Motor Motor
Motor
(400V - (220 V -
(400V/50
60Hz) 60 Hz)
Hz))
SPH
5.5 5.5 4.0
400 220
400
60 60
50
11.5 23.2
11.6
1440 1740 1740
S3 S1
S3
F f
F
IP55 IP 55
IP55
180
Table 3
L A
pA
95 dB 2.33 m/s
Table 4
Motor (220
V - 60 Hz)
SPH
5.5
220
60
21.6
1730
S1
F
IP55
eq
2