Mobileye C2-270 Manual Del Usuario página 6

Headway Monitoring and Warning (HMW)
WHAT IS HMW?
HMW AUDIO ALERT
HMW
Notice
VISUAL
ALERT
WARNING!
WHEN IS HMW
FUNCTIONAL?
THE DISTANCE
METER
VISUAL ALERTS
HMW WILL NOT ISSUE AUDIO WARNINGS WHEN:
Intelligent High-beam Control (IHC)
WHAT IS IHC?
WHEN IS IHC
FUNCTIONAL?
IHC WILL NOT
SWITCH TO HIGH
BEAMS WHEN
IMPORTANT NOTE
hmW displays your headway relevant to the vehicle in front of you.
if you get closer than a pre-defined value, it alerts you to the danger.
You hear a single chime when headway is defined unsafe.
the green car icon is displayed from the moment a vehicle is detected,
and as long as the headway is above 0.6 seconds.
the car icon changes to red when the headway is less than 0.6 seconds.
You will see the visual alert whenever a vehicle traveling in front of you
is detected. the numerical headway display and the audio alert are
operational only at speeds greater than 30 km/h (19 mph).
You will see – in seconds – the headway to the vehicle in front of you
(distance is measured in "headway seconds").
Notice
the ihc assists the driver in controlling the vehicles high beams and
increases their correct use by automatically switching from low beams to
high beams when no traffic is in close proximity to your vehicle on dark road.
the ihc is active at night when no traffic is in close proximity to your
vehicle on dark roads.
Whenever tail lights are recognized in front of the host vehicle up to
l
a distance of 400m and can track the vehicle to well beyond this range.
Whenever there is an oncoming vehicle up to a distance of 800m.
l
Whenever the host vehicle enters a well lit (urban) area or when street
l
lights are detected.
1. this feature is available only on certain mobileye c2-270 modules
2. this feature is available only if activated during the system installation.
3. this feature is available only in certain geographical areas.
WARNING!
the system has been muted.