PUREGEAR AutoGrip Manual Del Usuario página 2

Instructions:
Attaching the SUCTION MOUNT in your car
1. Unscrew the large socket nut and
push vent clip ball joint into the
hole until it snaps into place.
2. Screw the socket nut back on until
tight – this locks the vent clip onto
the wireless charging pad and holds
the adjustable support base in place.
3. Insert the USB-A plug into the car
charger, then insert the USB-C plug
into the wireless car charger.
4. Attach the suction mount by placing
the it onto the dashboard or window
in your car and lock the mount by
pressing down on the lever.
2
Instructions:
Attaching the VENT MOUNT in your car
1. Unscrew the large socket nut and
push vent clip ball joint into the
hole until it snaps into place.
2. Screw the socket nut back on until
tight – this locks the vent clip onto
the wireless charging pad and holds
the adjustable support base in place.
3. Insert the USB-A plug into the car
charger, then insert the USB-C plug
into the wireless car charger.
4. Attach the mount by placing the vent
clip bracket onto an air vent in your
car and lock the mount by pressing
down on the lever.
NOTE: The lever has two settings. 1 is for thin vents, 2 is
for thicker vents. If vent clip does not feel secure,
adjust setting accordingly.
3