PUREGEAR AutoGrip Manual Del Usuario página 3

Instructions:
Plugging in the car charger
1. Plug the car charger into the cigarette
lighter socket to power on. The LED
light on the wireless pad will be green
when powered on.
2. Place your phone on the charging
pad with the bottom of your phone
resting on the support base, and the
arms will automatically close and
hold your phone in place.
NOTE: Adjust the support base accordingly to ensure
best charging position depending on your device.
3. To remove your phone, touch the
button on either side of the mount
and the arms will open automatically.
4
Important Notes:
• Remove your phone before turning off the car. Once you turn
off your car, the arms will no longer open automatically.
• Do not place near an air bag.
• Please do not text and drive.
Specifications:
AutoGrip
Input: DC5V 2A, DC9V 1.67A
Power: 5W, 7.5W, 10W
Frequency: 110-205KHz
Qualcomm 3.0 Car Charger
Input: DC12-24V
Output: 3.6-6V/3A, 6-9V/2A, 9-12V/1.5A
5