Petsafe Wireless Pet Containment System Guía Para El Uso página 10

The Receiver
Collar is not
beeping when
setting up the
Boundary
Zone.
The Receiver
Collar is not
beeping or
administering
a Static
Correction.
The Receiver
Collar is
beeping
everywhere.
10
Troubleshooting
• The beep may be difficult to hear in a noisy
environment.
• Install Test Light as explained in the "Test Light
Instructions" section, and use it to determine
the location of Boundary Zone.
• Check that the Transmitter is set up according
to directions and install a new battery within 5
feet of the Transmitter.
• Check that the Transmitter is plugged into a
working outlet, turned on, the Power Light is
on, and the Transmitter controls are set at your
desired settings.
• Check Receiver battery to make sure it is
installed properly.
• When replacing the battery, do so within 5 feet
of the Transmitter.
• Check that the Transmitter is plugged into a
working outlet, turned on, the Power Light is
on, and the Transmitter controls are set at your
desired settings.
• Bring Receiver Collar within 5 feet of the
Transmitter to reset.
1-800-732-2677