English; Important - Laerdal Stifneck Select Manual De Instrucciones

Ocultar thumbs Ver también para Stifneck Select:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8

English

Intended Use
This product is intended to support cervical spine in a
neutral position during transportation, in combination
with other cervical and full body immobilization devices
(CSIDs and FBSIDs).
Cannula hooks are provided for the securement of
supplemental oxygen lines.

Important

In cases of a suspected spinal cord injury, proper
neck immobilization is only one part of total
immobilization.
It is imperative that the patient be properly
immobilized to prevent any movement of the spinal
column.
Warnings
Stifneck Select Collars should only be used by
qualified healthcare providers.
Improper use may result in injury or permanent
disability. Always follow local spinal immobilization
protocol.
Use the correct size collar. An oversized collar may
hyperextend a patient's cervical spine. An undersized
collar may not provide appropriate stability.
Do not adjust the Select or Pedi-Select collar on
patient.
User Instructions
1.
Measure the Patient
Align the head to neutral or "eyes forward" position
unless contraindicated by local protocol.
2.
Match the collar size to the patient:
Select: Choose from 4 adult positions.
Pedi-Select: Choose from 3 Paediatric positions.
3.
Adjust and Lock the adjustable collar
Adjust the chin support to the size
selected in step 2.
Neutral position
Shoulder to chin
Plastic edge to size window.
Use the same method for adjusting both Collars.
Lock both sides by pressing the two lock tabs.
4.
Preform the collar
5.
Apply the collar while manually maintaining neutral
head position
Place the chin support under the chin. If a different size is
needed, remove, resize, and re-apply the collar.
Pull the back of the collar snug while holding the front in
place, and then fasten.
For a supine patient, slide the rear panel behind the neck
before placing the chin support.
Technical Specifications
Storage:
Do not store collar in folded position.
Store in flat position.
Storage Temperature Range:
-34 °C to 52 °C
(-30 °F to 125 °F)
Operating Temperature Range:
-25 °C to 43 °C
(-13 °F to 110 °F)
4

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Stifneck pedi-select980010980012980020989910989920

Tabla de contenido