sauermann SI-CA 120 Guia De Inicio Rapido página 5

Si-CA 220 & Si-CA 320 :
6 Stop / Restart the Pump (Si-CA 120)
While in manual analysis, holding pressed both keys
instrument switch off the suction fumes pump and blocks the refresh of any current
measure. To switch on the suction fumes pump again and reactivate the refresh of the
current measure, press again the keys
7 Draft measurement
Before zeroing the pressure it is mandatory to REMOVE the probe from the chimney.
8 Measure Ambiant CO
It is mandatory to perform the instrument autozero in fresh, clean outdoor air.
In 'Select' can be
inserted all the
customer data.
and
and
ZERO Draft Sensor
Connect the
gas probe to
the instrument
and perform the
measurement.
Wait 5 minutes.
In 'Data logger', the
user can define the
analysis, memory
selection and printing
modes.
makes the
Once the pressure zeroing
is completed insert the
probe in the chimney and
measure the draft.
View & Save the
DRAFT measurement.
Save the
measurement.