sauermann SI-CA 120 Guia De Inicio Rapido página 6

9 Combustion Analysis & Saving
Before proceeding with the combustion analysis remember to set the proper fuel.
In case the automatic print mode is set then the average analysis printing start
automatically. Conversely, after the sampling of the third analysis, the average
analysis is shown, so that it can be sent to the printer or downloaded as explained
in the following.
To view different test measurements, use
measurement screens.
Xair = Excess air
ΔT = Differential Temperature (NET Temperature)
Tg = Flue Gas Stack Temperature
Scan the QR code using
the Si-CA QRCodeApp
Sauermann APP to download
the acquired data related to
the average analyses and
the additional measures, if
performed.
key to scroll through the various test
Eff. tot = Total Combustion Efficiency
Ta = Ambient or Incoming Air Temperature
Loss tot = Stack Losses
Automatically
saves the first
sample when
the set interval
expires, and
so on until the
third sample.