Attaching The Fan Blades - Progress Lighting AirPro P250071 Manual De Instalación

Attaching the Fan
Blades
1. Remove the three screws from the top
of fan motor assembly , then take off
the top housing (Figure 5)
2. Attach the blades to the fan motor
assembly by aligning the notches
on the blades with alignment post
on the flywheel and put the blade on
to the flywheel, secure with screws
and tighten it. Repeat these steps for
remaining blades. (Figure 6)
3. Put the top housing onto the fan
motor assembly secure with the
screws and tighten it .(Figure 7)
4. Make sure all the screws are firmly
tightened.
Screw
Screw
Screw
Motor Assembly
Screws
Blade
Motor Assembly
Blade
Screw
Motor Assembly
Figure 5
Figure 6
Screw
Screw
Figure 7
4.