Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
WARNING
● Be sure the electricity to the wires you are working on are shut off by either removing the fuse or
turning off the circuit breaker.
●
To reduce the risk of fire, electric shock, or injury to persons: do not touch hot lens, lampshade, or
enclosure.
●
If you feel you do not have enough electrical wiring experience or are unsure what electrical codes
are applicable to your jurisdiction, please consult the services of a qualified, licensed electrician.
● Lighted lamp is hot!
● Turn off/unplug and allow fixture to cool before replacing lamp.
● DO NOT touch the lamp at anytime. Use a soft cloth. Oil from skin may damage lamp.
● DO NOT touch hot lens, guard or hot fixture housing.
CAUTION
● Lamp gets hot quickly! Contact only switch/plug when turning on.
● Keep lamp away from combustible materials that may burn.
● The wire is intended for shallow burial, less than 6 inches deep.
● DO NOT operate or install a fixture with missing or damaged parts.
● DO NOT install fixture within 10 feet of a pool, spa or fountain.
● DO NOT exceed maximum lamp wattage marked on fixture.
IMPORTANT: For power pack (F) installation, please refer to the instruction manual enclosed
with the power pack (Item #0092251).
CALCULATING LIGHTING CAPACITY
The power pack has a 200-watt circuit that powers up to 200 watts of light. To determine the
maximum number of fixtures that can be safely connected to this power pack, add up the individual
wattages of all the fixtures. The total wattage of your fixtures must not exceed 200 watts.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble the
product. Contact customer service for replacement parts.
Estimated Assembly Time: 40 minutes
No Tools Required for Assembly
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
3
Publicidad
