Safety Instructions; Symbols And Icons; General Safety Instructions For Power Tools - Deltafox DP-CRH 2011 Traducción Del Manual De Instrucciones Original

The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibrations
as low as possible. An example of
how to reduce vibration exposure is
limiting the working hours. For this
purpose all parts of the operating
cycle have to be considered (for ex-
ample, times when the electric tool
is switched off and times when it is
switched on but running without any
load).

Safety instructions

Ensure that the safety instructions are
observed when operating the appliance.

Symbols and icons

Symbols on the appliance:
Carefully read these operating in-
structions.
Wear personal protective
equipment. Wear eye protection!
Wear hearing protection!
Wear a dust protection mask!
Electrical appliances must not be
disposed of with the domestic
waste.
The impact drilling function must
not be used when the keyless
chuck is attached.
Symbols in the manual
Warning symbols with informa-
tion on damage and injury pre-
vention.
Hazard symbol with information
on the prevention of personal
injury caused by electric shock.
Instruction symbols with informa-
tion on preventing damage.
Help symbols with information on
improving tool handling.
General safety instructions for
power tools
WARnInG! Read all safety no-
tices, instructions, illustrations
and technical data that have
been provided with this power
tool. Omissions in the compliance
with safety directions and instruc-
tions can cause electrical shock,
fire and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term "Power Tools" used in the safe-
ty instructions refers to mains-operated
power tools (with power cord) and to
battery-operated power tools (without
power cord).
GB
21