Tetra FilterJet 400 Instrucciones página 13

Attach using the suction cup mount
Procedure:
Fig. C
1. Push the suction cups into the suction cup mount.
2. Slide the suction cup mount into a groove on the pump.
– To ensure it stays in place, slide the suction cup mount into the groove as
shown in the diagram.
3. Press the suction cup mount gently but securely onto the side of the aquar-
ium.
– Direct the air hose and mains connection cable out of the aquarium.
Attach using the bracket mount
Procedure:
Fig. D
1. Slide the attachment clip into a groove on the pump.
– To ensure it stays in place, slide the attachment clip into the groove as
shown in the diagram.
2. Slide the bracket mount into the attachment clip until it is in the required
position.
3. Push the suction cup into the bracket mount.
4. Fix the air hose to the bracket mount using the air hose clip.
5. Hang the bracket mount over the edge of the aquarium and press the suc-
tion cup gently but securely onto the side of the aquarium.
– Direct the air hose and mains connection cable out of the aquarium.
UK
13