Pairing / Connecting The Seecodewheel; First Time Pairing; Setting Up The Seecodewheel; Contrast - Seecode SHF 20 Manual De Instrucciones

ENGLISH

5.4 Pairing / connecting the SeecodeWheel

5.4.1 first time pairing

5.4.2 connecting the wheel

5.5 setting up the SeecodeWheel

5.5.1 contrast

Before pairing please make sure, that the Bluetooth mode on
your mobile phone is activated.
For more details about how to add Bluetooth devices to your
mobile phone, please check its operation manual.
1. Enter pairing mode by pressing
you see READY PAIRING shown in the display.
2. Use your mobile phone to search for Bluetooth devices.
3. After he unit have been found by your mobile phone a
register ID will be shown on its display. The ID of the unit is
SEECODE.
4. Your mobile phone will request a pass code, please enter
"0000".
5. The screen will display
was successful
After pairing you can connect the unit either using your mobile
phone or by pressing
make sure Bluetooth have been activated on the mobile phone
before pressing
Once the connection have been established you will hear a
short tone signal and the mobile phones Bluetooth ID will be
displayed at the display, for example :
Setup function is only available when the SeecodeWheel is
connected to a mobile phone.
1. Press
2. Scroll in the menu with
Contrast.
3. Press to enter.
4. Select the wanted contrast level with
are 10 levels which can be selected.
5. press to save setting
13
to indicate, that the pairing
at the SeecodeWheel once. Please
.
and
for two seconds until
until you see LCD
and , there