Caller Id Display; Rejecting Calls; Voicedial - Seecode SHF 20 Manual De Instrucciones

7.4 making calls from call register / last number redial
7.5 speed dial

7.6 Caller ID display

7.7 rejecting calls

7.8 voice dial
1. Press .
2. Scroll in the register with
desired number.
3. Press to make the call.
For incoming, outgoing or missed calls indicator please refer to
the table LCD Indicators.
1. Press .
2. Scroll in the list with
number.
3. Press , to make the call.
Caller ID will be displayed in three ways:
1. By name
To display the callers name the name must be stored in the
phonebook of the SeecodeWheel .
2. By phone number
If the caller is not stored in the phonebook, only the
phonenumber will be shown.
3. Withheld number
If the caller withheld his number "withheld" will be shown in
the display.
Press to reject a call.
To use this function you must have stored voice tags in your
mobile phone, as the voice tags will be used from the mobile
phone.
To start voice dial:
Press for two seconds.
Speak the desired name (voice tag) after the tone.
If failed to recognize, you will hear a deep tone twice, press
and repeat above procedure.
18
and until you see he
and .until you see the desired
ENGLISH