Connecting The Measuring Instrument And The Sensor - Parker SCMA-VADC-600 Manual De Instrucciones

.1

Connecting the measuring instrument and the sensor

NOTICE
When connecting auxiliary sensors, be sure that the sensor
connection cable is connected using the proper cable colour.
More information can be found in the "Delivered sensor connection ca-
bles" and the "Technical Specifications" sections.
1 Connect the current/voltage converter using the fixed cable on the
Handmeter port with the "6-channel portable measuring instrument"
or the "3/4-channel portable measuring instrument".
2 Set the desired measurement range using the dial on the current/volt-
age converter.
If the connected auxiliary sensors are supplied with a voltage
greater than 18 V, then an external power supply unit should be
used. Connect the external power supply unit to the 11...24VDC
connection.
 Connect the auxiliary sensor using the Sensor port and the sensor
connection cable or another cable with an M12x1 interface.
41