Parker SCMA-VADC-600 Manual De Instrucciones página 47

Sample values table for the "6-channel portable measuring instru-
ment"
The configuration for the "6-channel portable measuring instrument" is
slightly different than the "3/4-channel portable measuring instrument"
With the "6-channel portable measuring instrument", the voltage signal
values of 0 V and 10 V are always entered under SIGNAL for FROM/TO.
This is also the case when the measuring range on the current/voltage
converter is set to 3 V, 10 V or 48 V. The FROM/TO setting for a current
signal under SIGNAL is also always fixed to the values 0 mA and 20 mA.
This is also the case when the current/voltage converter is set to a meas-
uring range of 200 mA or 4 A.
The sample values table and the following example clarify this in more
detail.
Current/voltage converter
Signal Signal output
setting
±48 V 0...3 V
±10 V 0...3 V
±3 V 0...3 V
±20 mA 0...3 V
±200 mA 0...3 V
±4000 mA 0...3 V
Menu setting on the portable meas-
uring instrument
UNIT
FROM TO
0 300
0 500
0 700
0 600
10 1000
-1 1
SIGNAL
FROM TO
0 V 10 V
0 V 10 V
0 V 10 V
0 mA 20 mA
0 mA 20 mA
0 mA 20 mA
4