General Description - GYS PACK PRO Guia De Inicio Rapido

Thank you for choosing GYSPACK PRO – this is a high quality product and in order to get the
maximum from it, we advise you to carefully read this instruction manual. Please also retain the
manual for future reference.
GENERAL DESCRI PTI ON
The high performance internal battery allows the GYSPACK PRO to serve 3 functions:
Instant Start (1750 A peak / 600 A) from vehicle equipped with 12V Lead battery (Gel or Liquid
electrolyte).
12 V DC power supply, to supply light Spot, TV, tools, etc...
In-built torch
To ensure good w orking conditions and optimize the durability of
!
its internal Battery, it is important to recharge it after each use,
and leave it plugged in until Next usage
STARTI NG FUNCTI ON
Test of internal battery before the start
In order to test the internal battery, press
Green light:
Orange light
Red light
Starting a vehicle
In order to use the GYSPACK PRO as a starter, follow these steps:
GYSPACK PRO
Internal battery is charged. Starting is possible
Attention !!! Please do not use the machine when the orange
or red light is lit !
You need to recharge it first
Disconnect the Gyspack from the mains. Turn the vehicle ignition key to
OFF.
Set the commutator of the Gyspack PRO to OFF. Be careful not to turn the
ignition key on before plugging the Gyspack.
Connect the red clamp to the + terminal of the battery, and the black one
to the – terminal. A buzzer will indicate any polarity inversion.
Switch the commutator of the Gyspack PRO on ON
Go to the driver's seat and turn the ignition key. If your engine does not
start, wait 3 minutes until next attempt. ( 6 sec max)
Nb : A vehicle which does not start could have a problem not related to a
defective battery: alternator, spark plug...
Unplug the black clamp, then the red one from the vehicle.
Recharge your Gyspack after use. (see 'Charging internal battery')
and the result will be displayed:
6