5.2 Pressing and holding down the power button for 3 seconds to record video, the red indicator light
will flash 3 times and then off.
5.3 Press the power button once to stop video recording, the blue indicator light will flash twice, then
the red indicator light will be solid on, indicating that the camera is back to standby mode.
VI. Camera/Still Photography
6.1 Power on the camera by pressing and holding down the power button for 2 seconds, the blue
indicator light will be turned on and off, then the red indicator light will be solid on, indicating that the
camera has entered into standby mode.
6.2 Press the power button once to take a photo. The red indicator light will flash once every time you
take a photo.
VII. Set Date and Time Stamp
7.1 Connect the camera to a proper PC computer with the USB cable when the camera is powered off.
7.2 Removable disk drive folder appears.
7.3 Click on the drive in the root directory and inside the root directory, create a TXT document file
named "time.txt".
7.4 Input the current date and time in the txt file with the correct format:
Year-Month-Day Hour:Minute:Second. (For example: 2015-11-30 15:36:39)
7.5 Save this file and turn on the camera, the system will upgrade the program automatically.
VIII. Video/Image Files Upload
8.1 Power off the camera.
8.2 Remove the memory card from the camera.
8.3 Insert the memory card into a proper PC by using a card reader.
8.4 Removable disk drive folder appears.
8.5 All the video and photo files can be accessed in the DCIM folder.
3 / 24