PNI Safe House PG300 Manual De Utilización página 16

System passwords
Ÿ Operation password: the default password is 1234. This password is needed when
you arm, disarm, monitor, intercom remotely through calling or texting to the SIM card
phone numbers of host.
Ÿ Programming password: The default password is 8888. You need this password
to program the system.
Password change
You can change the system passwords by choosing „Change password" app
option or by sending a SMS to the main unit phone number containing: current password
+ [30]/[31] + new password + #. If the change was received you will receive a
confirmation message.
SMS for changing the operation password: 123430xxxx# (xxxx=new 4 digit
password).
SMS for changing the programming password: 888831xxxx# (xxxx=new 4 digit
password).
For example: to change the programming password from 8888 to 0000 send the SMS
command:: 8888310000#
ATTENTION: If you change a password by SMS be careful to change it in the app also,
otherwise you won't be able to control the system trough the app.
Phone numbers setting
You can set up to 6 phone numbers for voice warnings and 3 for SMS warnings.
Set voice warnings phone numbers by choosing „Voice warnings" app option or by
Ÿ
sending a SMS to the main unit phone number containing: programming password +
[51]...[56] + phone number + # .
Delete a voice warning phone number by choosing „Voice warnings" app option or by
Ÿ
sending a SMS to the main unit phone number containing: programming password +
[51]...[56] + # .
For example: to set the phone number 07xx.xxx.xxx on the position 1 send SMS:
4
15 15
2
EN
1
3