CLEANING THE APPLIANCE
DISASSEMBLY AND CLEANING
1.
Take off the upper part of the BONECO W400.
2. Remove the drum with the AW200 evaporator mat.
3. Take out the A7017 Ionic Silver Stick
4. Turn both drum discs to release them. In doing so,
observe the markings on the outer side of the disc.
5. Remove the AW200 evaporator mat from the drum.
®
.
6. Clean the water base and the drum either by hand or
in the dish washer at a max. temperature of 50 °C.
7.
Clean the inside of the water tank by hand or with a
suitable cleaning brush using a commercially avail-
able dish detergent.
8. Clean the water tank cover with a commercially
available dish detergent and a cleaning brush.
9. Put the BONECO W400 back together by following
the steps in reverse order.
37
en