Description Of The Appliance - Boneco V2231 Manual De Instrucciones

Description of the appliance

Steam outlet
Cover
Water tank
Water tank cap
Water gauge
Control panel
Power plug
Operation
• Position the device on a level, stable and water-
resistant surface.
• Do not position the device directly beneath a plug
socket.
• When positioning the device, ensure that it is steady
and that the airflow is not obstructed by objects such
as furniture or curtains. Position the device at least
50 cm away from walls, furniture and curtains (risk of
damage from humidity).
• Do not position the device close to radiators or other
heat sources. Ensure that no one can trip over the
power cable and that the device is out of reach of
children (the steam expelled is hot). Do not allow
children to play with the device.
Use the device only in dry rooms of 60 m
150 m 3 in size, and do not use extension
cables.
Interior view
Scent container («ring»)
Cover for evaporator unit
Filling up the water
• Use the ON/OFF switch to turn the device off.
• Remove the plug from the mains.
• Remove the upper housing cover (Warning: hot after
operation!) and remove the water tank from the device.
• Turn the water tank upside down and unscrew the cap.
• Empty any remaining water and rinse the tank
thoroughly.
• Fill the tank with water and screw the cap on tightly.
Warning!
• Use tap water only, i.e. not mineral water or any other
softened water! Do not, under any circumstances, add
other substances (such as scents) to the water!
• Never pour water into the steam outlet!
• Add scents only to the scent container and not directly
/ to the water!
2
Illuminated water gauge
The colour of the illuminated water gauge changes depen-
ding on how full the water tank is:
• Blue = full
• Red = empty (evaporator board switched off)
When the tank is empty, the evaporator board is turned off
Steam outlet
automatically. As soon as the tank is refilled, the board is
turned on again.
The first time you turn the device on, or if you
have not used it for a long time, bear in mind
that it takes some time for the water circulation
system to fill up. As such, it takes 1 – 2 minutes for the
gauge to change from red to blue even though the tank
Magic Ball may be full.
Evaporator board
Scent container («ring»)
• Add only a small quantity of scents, essences or
Water level sensor
inhalants to the scent container ring.
• Warning! Do not add scents directly to the water in
the tank!
en
1