Basic Functions; Auto" Mode; Air Quality Indicator; Manually Controlling The Fan Level - Boneco P340 Manual De Instrucciones

20

BASIC FUNCTIONS

en
The BONECO P340 can easily be adapted to your needs.
During start-up of the appliance, the basic setting of the
fan level is in automatic mode (AUTO MODE).

"AUTO" MODE

In the mode the fan level is automatically regu-
lated depending on the air quality. After the appliance is
switched on for the first time, it runs at the lowest fan
level «L» for the first few minutes.

AIR QUALITY INDICATOR

The air quality is measured by the built-in sensor
and is visualized by different colors on the "air" display.
Clean Acceptable
Once the appliance is switched on, it takes around one
minute for the sensor to measure the current air quality.
During this time, the appliance runs at level «L».
Please note that the measured values may change de-
pending on the size of the room and the position of the
appliance.
The sensor registers the smallest dirt particles and
gases. They include house dust, pollen, gases such as
tobacco smoke, organic compounds and odors.

MANUALLY CONTROLLING THE FAN LEVEL

The fan level of the BONECO P340 can be manually con-
trolled.
Push the button several times until the desired fan
level is attained.
Poor