Publicidad
Idiomas disponibles
Idiomas disponibles
key:
A = AMB
PL = 2
M = èê
A = 2
GROUP = 2
SYS = 1
key :
A = 2
BUS = 0
PL = 1
M = èê
key :
A = 2
PL = 3
M = èê
A = 1
GROUP = 4
key :
SYS = 1
A = 1
BUS = 1
PL = 1
M = èê
key :
A = 1
PL = 5
M = èê
5
interface
A = -
GROUP = -
SYS = 6
interphone:
BUS = 1
external
point
address 1
interphone:
external
point
address 3
3 – English
interface 1
motor 1
series 1
TTBus
TTBus
interface 2
control unit
series 1
BusT4
BusT4
control unit
control unit
series 1
series 3
BusT4
BusT4
The interface configuration is shown below. For a practical example, see fig. 6.
4
Configurator
A
-
GROUP
SYS
BUS
motor 3
series 3
7 - Power-up and signals
After making all connections and configurations, power up the INB interface. On ac-
tivation, the interface reads the values of the configurators and searches for the de-
vices present on the "BusT4" or "TTbus". If a motor or control unit is detected, Led
L4 turns off for the same number of times as the value of the series of the device de-
tected.
In general, the operations in progress are indicated by four Leds:
control unit
series 5
• L1 and L2: indicate the activity status on the SCS bus (flashing indicates normal
conditions).
• L3 and L4: indicate the activity status on the Nice bus (flashing indicates normal
conditions).
- green led L3: the flashes indicate reception or transmission of messages or com-
mands. On power-up, if L3 remains lit, check that the SCS system is powered.
- red led L4: the flashes indicate the interface power status. On power-up the Led
indicates the series of the devices found, connected to the TTBus or BusT4: the
number of times the led turns off indicates the series of the motor or control unit de-
tected.
Table C provides a detailed description of all status signals emitted by the Leds.
6
actuator:
address 1
actuator:
address 3
Description
Value
Do not use
–––
Do not use
–––
Do not use
–––
SCS system
7: access control
Type of Nice bus used
1: BusT4
interface
control unit
series 1
A = -
GROUP = -
BusT4
SYS = 7
BUS = 1
control unit
series 3
BusT4
Publicidad
