SUNTEC KLIMATRONIC HEAT WAVE STYLE 1000 Manual De Instrucciones página 13

(II) Application KLIMATRONIC HEATWAVE LCD
 Turn on the power-on switch on the
on, showing the instant temperature value. The displayed temperature ranges from -9°C to 50°C.
Meanwhile, the indicator lights for temperature and timing are on.
 Pressing on the power key (ON/OFF/Power key) Turn on the power key will start the heater. The
power indicator light will be on. Through continuous operation of the power key, select the high heat
mode  low heat mode (the low heat indicator light will be on)  shut-down mode (both power and
character indicator lights will be off).
 Press the mode key and the indicator will glitter. After pressing the "+" key or "-" key to select timing
range (1 to 19 hours), the indicator light enters a lasting lighting state.
 Press the mode key again, and the indicator light will glitter. Then press the "+" key or "-" key to select
temperature range (15°C —35°C). The indicator light enters a lasting lighting state.
 After power configuration, the LCD screen displays instant temperature. When the temperature rises to the
preset
value, the heater stops heating. The power indicator light is off and its character indicator light
is on.
 Press the "OFF" key, and the indicator light for ambient temperature and timing character will be on,
while other character indicator light will be off. After the heat mark glitters for several seconds, the
heater stops working.
 Module indicator light turns red.
The room temperature will automatically be kept at the set level. The appliance will turn itself on
periodically if the room temperature drops below the desired level.
The first time the appliance is used, light odours might occour, This is related to manufacturing processes
and disappears quickly!
 Never operate the appliance unattended and keep children away.
 Never cover the appliance!
 The metal housing of the appliance can become hot during operation. For this reason it should not be
touched. After switching the appliance off, consider that it takes a few minutes to cool down, Let the
appliance always cool down for an adequate amount of time before storing it. Always disconnect the
appliance from the mains, if you do not use it for long time!
 The appliance implements a tilt safety device, If the appliance falls over inadvertently, it turns itself off
automatically. Once it is in its original position again, it will turn itself on automatically again.
Cleaning
 Always disconnect the appliance from the mount before cleaning it! Make sure that is has cool down
completely!
 Clean the outside of the appliance with a damp and clean cloth und dry it with a dry cloth afterwards.
 Never use aggressive cleaning agents or chemicals, only use mild detergents.
 Never disassemble the appliance for cleaning.
 Never rinse or spray the appliance with water!
Troubleshooting
 If the appliance malfunctions, check the following points first:
 Check the connection to the mains outlet and make sure that the outlet is live (e.g. plug in a lamp
and check if it lights up),
 Check if the appliance is turned on
 Check if the appliance stands on a firm surface. Uneven or tilted positions can trigger a tilt safety switch.
If that is the case, adjust the position of the appliance accordingly.
panel. Then the indicator light for instant ambient temperature is