Cooper Lighting Solutions ADP140567 Instrucciones De Instalación

ADP140567 703192
Installation Instructions – Surface Downlight
Instructions d'installation – Plafonnier intensif en saillie
Instrucciones de instalación de la luminaria focal para montaje en
superficie
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
INSTALLATION
To Mount Canopy Assembly
1. Remove canopy assembly from housing by
loosening screws through keyholes.
2. Make wiring connections.
3. Fasten MTG. strap to ceiling outlet using outlet box
screws.
NNote: If 4" octagon box, then MTG. strap is not needed.
Replace outlet box screws with 1" long screws
provided.
4. Adjust socket and reflector thumb nuts on canopy
assembly for proper lamp and reflector positions
(vertical lamps only.)
To Install Housing
The housing attaches to the canopy assembly with
screws through keyholes.
To Install Trim
Attach trims to canopy assembly with screws through
keyholes, or with center stud and thumb nut.
To Clean Trims
1. Gently wipe with a soft, clean, dry lint-free cloth to
remove dust.
2. Wipe with a mild detergent solution on a soft, clean
cloth to remove fingerprints and stains.
3. Rinse with clean, soft water and dry with lint-free
cloth.
C16032 Unit
Canopy
Assembly
6050
Figurt 1. Screw Attached Reflector
C17032 Unit
C17042 Unit
Canopy
Assembly
7450
7050
Figurt 2. Screw Attached Reflector
C19232 Unit
Canopy
Assembly
9250
Figurt 3. Center Stud Attached Reflector
TM TM
INS # INS #
Reflector
Adjustment
Lamp
Adjustment
6000
Reflector
Adjustment
7400
7000